Summers Superchisel - 5-Section Manuel d'utilisateur télécharger pdf (Page 16)

SECTION 2 – SET-UP OF CENTER SECTION

3. Block center frames off the oor.

4. Install cylinder attach brackets with 3/4” u-bolts.

NOTE: – Rear cylinder attach brackets (8T4226) should be centered at 62” from the center

of the frame.

– Front cylinder attach bracket (8T4200) should be centered on the front of the

frame.

5. Insert eyebolts (8K1683) into each cylinder attach bracket.

– Tighten 1-1/2” nuts so the same amount of threads are above the top nut on all eye-

bolts. Insure that cylinder attach holes are aligned when eyebolts are tightened.

5a. Install brace behind front center cylinder attach bracket with 3/4” u-bolts.

2-4

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 97 98

Pas de commentaire

Summers Superchisel - 5-Section Manuel d'utilisateur Page 16