Summers Disk-Chisel Manuel d'utilisateur télécharger pdf (Page 75)

3-9

SECTION 3 – OPERATION (32’-40’)

6. Leveling machine from front to back. 16’ & 20’: Adjust hitch height to level machine at working

depth. 32’-40’: With machine still in the ground, check depth of tillage in the front and the back.

If leveling is necessary, use wrenches provided to adjust eyebolt on front wheel assembly up or

down.

If Coulter gangs are supporting front weight of implement, adjusting the front wheels will not level

the machine. In this case, adjust depth of coulter gangs to level machine.

NOTE: It is best to check levelness after each adjustment by working test strips within the

ﬁ eld.

IMPORTANT!

Pressure must be removed from cylinders before adjusting eyebolts. Rest machine on

top of the ground. Shut tractor off and relieve pressure.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 118 119

Pas de commentaire

Summers Disk-Chisel Manuel d'utilisateur Page 75