Summers Disk-Chisel Manuel d'utilisateur télécharger pdf (Page 40)

GANG TUBE MNTING8/14/2012 9CC3612.iam/

8D0350

3/4"X4"X10"

8K8430

8K8435

8X0306

3/4" LW

8X0260

3/4" N

8CC1005

8X0234

7/16" LNUT

8K1660

8X0044

7/16" X 3-1/2"

8X0368

1-1/2" FW

8CC1400

8CC1380 32' LEFT

8CC1390 32' RIGHT

36' LEFT

8CC1410 36' RIGHT

8CC1420 40' LEFT

8CC1430 40' RIGHT

8K5515

3/4 X 4 X 6"

(CENTER SECTION ONLY)

SECTION 2 – SET-UP OF DISK-CHISEL & COULTER-CHISEL CENTER SECTION (32’-40’)

2-28

– Install rectangular washer (8CC6035) with 1-1/4” lockwasher and nut onto bottom of caster

arm.

– Install hubs (8K1105S) as shown and retain with 1/2 x 3-3/4” bolt and nylock nut.

– Attach wheel and tire assemblies. Tighten lug nuts to 240 ft-lbs.

28. Tighten slotted nut (8X0292) so that caster wheel assembly cannot be moved by human force.

– Retain slotted nut with 3/8” hardware as shown.

29. Attach hitch to center with 1-1/2” x 10-5/8” pins.

NOTE: Center with 1-1/2” ID 10 GA at washers.

30. Install 7/16x3-1/2” retaining bolts through hitch pivot pins. Secure with lock nuts.

31. Attach hydraulic hose holder and tip holder with 3/4 x 1-1/4” bolt and at washer.

32. Attach hitch jack to jack spool.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 48 49

Pas de commentaire

Summers Disk-Chisel Manuel d'utilisateur Page 40